In this article, we will talk about the 30gr Xiaomi Transformacion Wifi repeater setup and its technical features.
The modems you use at home usually have reception problems. Therefore, repeater devices are useful in expanding the internet connection area. Since these devices cannot convert the internet signal coming from the main line cable to a Wi-Fi signal, you cannot use them as modems. Therefore, it performs the task of repeating the signal of the modem you are using. When choosing the location of this device, do not place it so far away that the connection to the modem is lost. At the same time, when you place it very close to it, you will not see the benefit as it will do the same as your modem.
Although the Xiaomi Transformacion is quite small, it completely eliminates the problem of Wi-Fi shooting in your home. Installation of the device is quite simple. As for its performance, it offers a transfer rate of up to 300Mbps. It also supports the Wi-Fi 802.11b/g/n transmission standard. Thus, it meets all your needs for a safe and fast internet access. This device with dimensions of 220x150x70mm works with a frequency of 2.4ghz. There is no 5ghz support. However, this does not mean that it cannot translate the 5ghz frequency. 2.4 ghz for output signal is compatible with many devices.
- Transfer Rate: 300 Mbps
- Transfer Standard: Wi-Fi 802.11b/g/n
- Frekans: 2.4GHz
- Boyut: 220 x 150 x 70 mm
- Weight: 30g
Xiaomi Transformacion Wifi Repeater Setup
You can reset the Xiaomi Wifi Pro Repeater to reinstall it. Repeater must be on for reset. The device does not reset in the off state. With the help of a needle or toothpick whose tip is not very sharp, you should press the “Reset” area on it until the status LED turns off. Then the lights will turn on again and you can install.
- Connect the Xiaomi Wifi Pro Repeater with the converter to the socket.
- Install the Mi Home app on your smartphone from the app store.
- Sign in to the application by creating a subscription with your e-mail address.
- Tap the add device button on the top right of the screen. Then select Xiaomi Wifi Pro.
- Select the Wi-Fi network you are connected to and enter its password.
- Define a location for the booster as home or office.
- The optimization will be completed in seconds.
Setup is complete when you see the LED on the booster is blue.
Open Mi Home app to change your booster’s Wi-Fi password. Select the name of your booster among the products you have added to the application here. On this screen you can create a new SSID and a new Wi-Fi password for your booster.
The Xiaomi Transformacion Wifi Repeater Setup article first appeared on TeknoDestek.